Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Wed Nov 27, 2024 5:36 am


All times are UTC - 5 hours





Post new topic Reply to topic  [ 142 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next
Author Message
 Post subject: Re: Steve's Baby Bird
PostPosted: Mon Dec 26, 2016 8:30 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Looking good, looking forward to seeing this one.



These users thanked the author Clinchriver for the post: SteveSmith (Mon Dec 26, 2016 11:16 am)
Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Dec 30, 2016 11:48 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
All progress has come to a halt. I have some time off so I am rebuilding the inside of the shop. Hard to take a Sawzall to my old built-ins but I'm getting it done. What a mess!

This side getting redone,,, Image

While everything else is stacked on this side. And yes, I kept the jointer, for now :)
Image

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Dec 30, 2016 5:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
Nice jointer, Steve, I have the same one. I've had mine for 28 years, and can't wait to upgrade!
A friend of mine used to build furniture, and his shop looked like picture #2, except there was always 8" of shavings on the floor too!
Hope it goes quick and painless for you!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Dec 30, 2016 6:29 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Hi Alex, thanks! I bought that jointer 17 years ago. I've got a fret level/setup to do tomorrow and then have all next week to get the major projects done. Believe it or not there is space in the back to work - just not much.
Image

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Thu Jan 05, 2017 4:05 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Headed over to Steves to pick up my strings we divided a gross of EJ-17's. The little guitar is lovely and his shop looks like a bomb went off :mrgreen:


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Jan 06, 2017 10:18 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Clinchriver wrote:
Headed over to Steves to pick up my strings we divided a gross of EJ-17's. The little guitar is lovely and his shop looks like a bomb went off :mrgreen:


LOL, bomb indeed but it is getting better. The office, guitar storage, and setup bench are mostly complete. I Santa Claus'ed a new tool chest to myself and got that out of the truck, into the shop and setup. Got to do a quick inlay for our luthier group then I'll start of the final demo of the opposite wall. I won't get finished today but hope to have the major stuff done.

Thanks for the kind words about the little guitar. So far I'm real happy with it and hope to get back to it by the end of the month.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Jan 06, 2017 3:03 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2109
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
That's a great little project you have there. Nothing to brighten up the holidays for me like reorganizing my entire shop. ;)

The one advantage is that it gives you an excuse to thin out all the accumulated shop detritus that invariably collects....

When I moved in 2013 - I could not believe the pile of wood scraps and miscellaneous trash that I dug up and threw away. It kinda crystallizes your thinking on "well... I can probably use it so I will save it....

Your inlay work looks great. I need to find a class on inlay.... It's a complete mystery to me...


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Sat Jan 07, 2017 10:28 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
I have already hauled out a large trashcan worth of scrap. Most of it plywood 2-by from demo'ing old cabinets and shelves but a surprising amount of misc pieces of guitar wood. When I moved into this shop I brought cabinets and benches from my much larger, former, shop where I was making custom furniture. I installed a lot of this as built-ins in the new shop which was a mistake. As my needs have changed it is now a royal PITA to undo all the built-ins. Lesson learned, all the new benches are free standing.

Thanks for the nice words on the inlay work. I learned to inlay on my own - did my first shell inlay on a pair of lamp brackets I made in '76, I used some abalone shell I got while diving (I was living in San Diego at the time). So I've been practicing a long time but still have a lot to learn. I've also picked up lots of hints from here, the MIMF, and some videos online.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Mon Jan 30, 2017 8:11 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
So I'm supposed to update every week or so. No progress on the guitar but shop is coming along. Made some shallow drawers out of deep drawers under the bench to get as many tools as possible into designated spots. Got the chisel drawer set up tonight. Image

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Tue Jan 31, 2017 11:59 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2109
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
That's some nice looking chisels right there. Mmmmmmmm


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Tue Jan 31, 2017 2:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
truckjohn wrote:
That's some nice looking chisels right there. Mmmmmmmm


Thanks. There's a few junkers. Most of the good ones are from my wood carving days ;)

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Feb 17, 2017 9:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
This shop remodel is now at day 55, about 25 days longer than I wanted to take but I honestly expected it to take as long as it has. I'm getting close now. Major demo/rebuilds are done. Drawer count is up to 42 so lots of things that were on the wall or in stacked plastic bins are now in drawers. I still need to run ducting and set up sanders in this corner. I'll sure be glad when this is done so I can finish this little Size 5 Terz guitar.
Image

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Feb 17, 2017 9:44 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2109
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Wow. Looking a lot better. Definately getting much more neat and tidy.

I haven't done any of this sort of thing in my shop because winter is the key time for me to build because of humidity control. Once warm weather gets here - it gets swampy... Bad for guitar building... Good for house and shop projects.



These users thanked the author truckjohn for the post: SteveSmith (Fri Feb 17, 2017 9:59 am)
Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Feb 17, 2017 10:02 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Thanks John, it's getting there. I have humidity control year round so I can build year round. In E. TN a dehumidifier takes care of the summer months and in the winter I just let the shop go down to 55 degrees F which keeps it at 40% or so.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Sun Mar 05, 2017 5:52 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Still not back to the size 5 but I've got part of the shop operational again. Doing a setup on a P Bass. Image

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Sun Mar 05, 2017 7:06 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2109
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Starting to get closer. Almost there.



These users thanked the author truckjohn for the post: SteveSmith (Mon Mar 06, 2017 7:31 am)
Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Mar 17, 2017 1:57 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Well I think I'm only a week or two out from having the shop finished. I've been finishing the last of the ductwork for the dust collection system then just need to clean out all the leftovers from the shop.

Next up for the size 5 will be final sanding and finish. My plan right now is French polish. I might even get done before the deadline idunno

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Fri Mar 17, 2017 2:50 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2109
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
It's so close!


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Mon Mar 27, 2017 7:02 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Major work on the shop is done - finally!!! Still have a few dozen small projects to finish but at least i can get back to work.

Here's a few photos to contrast with the previous.ones.

The major dust makers are at the far end and all are connected to the dust collector now.
Image

Mobile go-bar deck, down draft table (old file cabinet holds sand paper stock). Parking area for drum sander, table saw/jointer cart, buffer and mini lathe.
Image

Finally, something related to the thread. I found the Baby Bird none the worse for being stored away for 3 months. The neck joint needs a minor tweak then final sanding and finish. Image

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Mon Mar 27, 2017 8:59 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2109
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
It looks good. Time to make some progress again



These users thanked the author truckjohn for the post: SteveSmith (Mon Mar 27, 2017 9:10 pm)
Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Wed Mar 29, 2017 6:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
The shop is looking good, Steve, kind of like mine.... until I woke up, and had a coffee! [headinwall]

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Wed Mar 29, 2017 7:41 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Alex Kleon wrote:
The shop is looking good, Steve, kind of like mine.... until I woke up, and had a coffee! [headinwall]

Alex

Ha ha, I bet. Hard to shut down for several months when you're trying to make a living. I did accomplish my main goals which were to build a setup bench, gain more space to move around, increase storage to get crap off the benches, upgrade some of the equipment and improve dust collection. I still have at least a dozen small projects to do, of course. And you know it's not likely to look this good in six months.

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Thu Mar 30, 2017 3:21 am 
Offline
Contributing Member
Contributing Member

Joined: Sat Feb 19, 2011 7:44 pm
Posts: 1225
Location: Andersonville
State: Tennessee
Country: USA
Focus: Build
Status: Professional
Looking good, thats a nice shop!



These users thanked the author Clinchriver for the post: SteveSmith (Thu Mar 30, 2017 6:15 am)
Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Thu Mar 30, 2017 6:34 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13387
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Yeah your shop has great Karma Steve!!! Really nice Baby Bird too!!



These users thanked the author Hesh for the post: SteveSmith (Thu Mar 30, 2017 6:44 am)
Top
 Profile  
 
 Post subject: Re: Steve's Baby Bird
PostPosted: Thu Mar 30, 2017 2:17 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7378
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Hesh wrote:
Yeah your shop has great Karma Steve!!! Really nice Baby Bird too!!


Part of that Karma has to come from the cool setup bench design that I copied from yours. Thanks for sending the measurements [:Y:]

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 142 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com